| Customization: | Available |
|---|---|
| Standard or Nonstandard: | Standard |
| Feature: | High Speed, Vacuum, Antimagnetic, Cold-Resistant, Corrosion-Resistant, Heat-Resistant |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| d |
35 mm
|
Bore diameter |
| D |
110 mm
|
Outside diameter |
| H |
66 mm
|
Hight |
| Ca |
105,000 N
|
Basic dynamic load rating, axial |
| C0a |
265,000 N
|
Basic static load rating, axial |
| Cr |
27,500 N
|
Basic dynamic load rating, radial |
| C0r |
53,000 N
|
Basic static load rating, radial |
| Cua |
22,900 N
|
Fatigue load limit, axial |
| Cur |
7,600 N
|
Fatigue load limit, radial |
| nG Oil |
4,000 1/min
|
Limiting speed for oil lubrication |
| nG Grease |
1,250 1/min
|
Limiting speed for grease lubrication |
| MRL |
2.3 Nm
|
Bearing friction torque |
| ≈m |
1.927 kg
|
Weight |
| Da max |
74 mm
|
Maximum diameter of housing shoulder |
| da min |
60 mm
|
Minimum diameter shaft shoulder |
| t1 |
0.2 mm
|
Position bore in the housing |
| H1 |
41 mm
|
Height outer ring over wave washer |
| C |
18 mm
|
Width, outer ring |
| C1 |
10 mm
|
Distance to lubrication hole |
| D1 |
73 mm
|
Rip diameter shaft washer |
| B |
14 mm
|
Width, inner ring |
| rmin |
0.3 mm
|
Minimum chamfer dimension |
| r1 min |
0.6 mm
|
Minimum chamfer dimension |
| d1 |
3.2 mm
|
Diameter lubrication hole |
| J |
88 mm
|
Pitch circle diameter (holes) |
| n |
12
|
Number of screwing holes |
| n x t |
30 °
|
Split |
| Tmin |
-30 °C
|
Operating temperature min. |
| Tmax |
120 °C
|
Operating temperature max. |
| caL |
3,500 N/µm
|
Rigidity axial |
| ckL |
1,300 Nm/mrad
|
Tilting stiffness |
| Mm |
8.47 kg*cm2
|
Mass moment of inertia |
|
1 µm
|
Axial runout | |
| radial |
ZMA35/70
|
Recommended INA precision locknut for radial locking (not included) |
| axial |
AM35
|
Recommended INA precision locknut for axial locking (not included) |
| MA |
100 Nm
|
Tightening torque nut |
|
27,480 N
|
Required locknut force | |
|
M8
|
Screw size | |
| na |
12
|
Number of screws |
| na x ta |
30 °
|
Division (screwing holes) |
){kind=link}